Punch Die Precision Tester SC-31/32
Suitableforprecisionstampingprocessing,precisemonitoringiscarriedoutfordifficulttodetectdefectssuchasproductcrushing,abnormalmaterialthickness,andoverlappingstampingpartsduringhigh-speedautomaticstamp...
Suitable for precision stamping processing, precise monitoring is carried out for difficult to detect defects such as product crushing, abnormal material thickness, and overlapping stamping parts during high-speed automatic stamping process, effectively protecting the mold, reducing product defect rate, and improving product quality and output.
Features:
◆ Equipped with first bounce monitoring and bottom dead center monitoring functions (optional);
◆ Sensors have interchangeability;
◆ Automatic monitoring of the punching machine without the need for in-place signals;
◆ The operation interface is simple and clear;
◆ Monitoring the stamping frequency of the punching machine, up to 2500SPM;
◆ Sensor disconnection monitoring.
parameter：
?
?
| measuring principle | Eddy current loss mode |
| Variation display | ±99.5um 2-bit LED display |
| Monitoring value display | 99.5um 2-bit LED display |
| Monitoring accuracy | 0.5um |
| Punch stroke distance | 9mm |
| output | Relay contact output (N/O, N/C) 250V 2A |
| Remote monitoring | Reset, inhibit |
| exception handling | Abnormal light on, output stop signal, response time<12ms |
| operation temperature | –10~+50℃ |
| Sensor distance | 1.2±0.4mm |
| Highest frequency | 2500SPM |
| Working power supply | AC100V~230V 50/60HZ |
| size | SC-31: 180(L)×70(W)×110(H)mm,? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?SC-32: 180(L)×88(W)×110(H)mm |
Recommended products
